6
904144 REV A 1/9/12, INST 1970-72 CUTLASS w/ AC EVAP KIT PG 6 OF 25
BATTERY, BATTERY TRAY (RETAIN)
DRAIN RADIATOR, REMOVE RADIATOR
EVACUATE THE A/C SYSTEM IF NECESSARY
O.E.M. CONDENSER AND DRIER (DISCARD) SEE FIGURE 1
O.E.M. A/C LINES FROM COMPRESSOR TO EVAPORATOR (DISCARD) SEE FIGURE 1
O.E.M. COMPRESSOR AND BRACKET (DISCARD) SEE FIGURE 1
EVAPORATOR BLOWER ASSEMBLY (DISCARD)
TO REMOVE THE EVAPORATOR AND BLOWER ASSEMBLY (UNDER HOOD) AND THE AIR
DISTRIBUTION SYSTEM (UNDER DASH) THE FACTORY MANUAL INDICATES DOING THE
FOLLOWING,
REMOVE RIGHT INNER FENDER.
OEM HEATER HOSES, A/C HOSES, HARDLINES AND DRIER (DISCARD). SEE FIGURE 1.
OEM A/C & HEATER WIRING/VACUUM HARNESS MOLDED GROMMET. SEE FIGURE 1.
INSTALL 1 3/4” PLUG IN FIREWALL. SEE FIGURE 1
PASSENGER SIDE GRILL INSERT.
BEFORE STARTING THE INSTALLATION, CHECK THE FUNCTION
OF THE VEHICLE (HORN, LIGHTS,ETC.) FOR PROPER OPERATIONS.
STUDY THE INSTRUCTIONS, ILLUSTRATIONS, & DIAGRAMS.
ENGINE COMPARTMENT
REMOVE THE FOLLOWING
OEM A/C
& HEATER
WIRING/VACUUM
HARNESS
MOLDED GROMMET
317102
1 3/4” PLUG
FIGURE 1
Summary of Contents for 1970-72 Cutlass
Page 25: ......
