6
905069 REV A 4/21/10, 1968 NOVA w/ AC EVAP INSTR PG 6 OF 25
BEFORE STARTING THE INSTALLATION, CHECK THE FUNCTION
OF THE VEHICLE (HORN, LIGHTS,ETC.) FOR PROPER OPERATIONS.
STUDY THE INSTRUCTIONS, ILLUSTRATIONS, & DIAGRAMS.
ENGINE COMPARTMENT
BATTERY, BATTERY TRAY (RETAIN).
DRAIN RADIATOR, REMOVE RADIATOR (RETAIN)
OEM CONDENSER AND DRIER (DISCARD). SEE FIGURE 1 BELOW
OEM COMPRESSOR AND BRACKET (DISCARD). SEE FIGURE 1
EVAPORATOR BLOWER ASSEMBLY (DISCARD)
TO REMOVE THE EVAPORATOR AND BLOWER ASSEMBLY (UNDER HOOD) AND THE AIR DISTRIBUTION
SYSTEM (UNDER DASH), THE FACTORY MANUAL INDICATES
REMOVING RIGHT INNER FENDER PANEL.
OEM HEATER HOSES (DISCARD). SEE FIGURE 1
OEM A/C HOSES AND FIREWALL GROMMET (DISCARD). SEE FIGURE 1
INSTALL 1
⅝
” PLASTIC PLUG IN FIREWALL (A/C CARS ONLY). SEE FIGURE 1a BELOW
EVACUATE THE A/C SYSTEM IF NECESSARY.
CONDENSER ASSEMBLY & INSTALLATION
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH
THE CONDENSER KIT TO INSTALL THE CONDENSER.
BINARY SWITCH INSTALLATION ( REFER TO CONDENSER INSTRUCTIONS)
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH THE
BRACKET KIT TO INSTALL THE COMPRESSOR BRACKET.
COMPRESSOR & BRACKETS
REMOVE THE FOLLOWING:
DRIER
A/C
HOSES
HEATER
HOSES
INNER FENDER
PANEL
COMPRESSOR
AND
BRACKET
1
⅝
”
PLASTIC PLUG
317101
GROMMET
FIGURE 1
FIGURE 1a
A/C
HO SES
BATTERY
TRAY
COVER PLATE
640678-FCR
(INCLUDED IN
HOSE KIT)
NOTE: ONCE BATTERY IS REMOVED.
REMOVE A/C HOSES AND GROMMET
FROM BESIDE BATTERY TRAY. RETAIN
THE (4) OEM GROMMET MOUNTING
SCREWS.
(4) O EM
M O UNTING
SCREWS
GRO M M ET
APPLY A BEAD
OF SILICONE
AROUND OPENING
(4) O EM
M O UNTING
SCREWS
