Vinsetto 920-076V90, Assembly & Instruction Manual

Page: 41 / 43

Metric-English Display Switch:
Press and hold the Keys “1”and “4”at the same time for more than 3 seconds, the display height is
switched between male and Engish,power o
ff s ave settings.
OPERATION DESCRIPTION
Code Descripition And Processing Methods:
1.The code “rSt” indicates that it is currently in the reset preparation state.You can press and hold
the Key “ ” to reset it in the preceding way.
2.The code “Erl” indicates a fault,which may be that the motor is not rotaing and hall data
is not currently returned.Press and hold the Key “ ”in the above way to enter the reset
preparation state.After check and handle it properly.
3.The code “Hot” indicates that the system is overheated ,allowing the system to rest for
more than 18 monutes before mormal use.
4.If the above method does not solve the problem,umplug the power supply,check all components
of the system and the connection are in good condition,and then power on and re-operate.
5.If the desk still fails to work,contact customer service.
４０