Vinpower ROBOTIC AUTOLOADER 3.6.0 User Manual Download Page 42

Page: 42 / 64

System Utilities
1.Disc Info

Disc Info
Please Insert Disc

Disc Info
3 Disc Detected, GO?

System Utilities
2.System Info

Setup
15.BD Safe Copy Menu

BD Safe Copy Menu

Show

BD Safe Copy Menu

Hide



Press

the

Down

button repeatedly until “1” is displayed.



Now, “021” is displayed, press

ENT/Enter

button once and the cursor moves to

“OK”

Then, press the

ENT/Enter

button once to submit your maximum failures per job.

13.15 BD Safe Copy Menu

Use this setting to determine whether to show or hide

“BD Safe Copy”

on the main menu.

Note:

This setting will only be shown in Blu-ray models.

Use the

Up or Down

button to select the

BD Safe Copy Menu

and press the

ENT/Enter

button to enter that menu.

Use the

Up or

Down

button to select whether the

BD Safe Copy

is to be shown or hidden, and press the

ENT/Enter

button to select that

option.

14. System Utilities

System Utilities

is used to provide useful tools for duplication aspect of the system. Each of these options is

discussed in its own subsection.

14.1 Disc Info

Use the

Disc Info

utility to identify the type and other information about your blank recordable media.

Note:

The Disc Info function does not use the robotic capabilities of the system. You must manually

insert the discs into the drives.

Use the

Up or Down

button to select the

Disc Info

menu and press the

ENT/Enter

button to enter that menu. The system will proceed to the

Please

Insert Disc

menu.

Place your disc(s) into the drives.

After a few seconds, the system will detect the discs and ask you if you want
to proceed. Wait until all of the discs have been detected and press the

ENT/Enter

button to continue.

14.2 System Info

The

System Info

menu provides a lot of hardware information about the autoloader such as firmware

versions, Duplication/Robot Control Boards type, etc. You can scroll through the various specifications by
pressing the

Up or Down

button.

Use the

Up or Down

button to select the System Info menu and press

the

ENT/Enter

button to enter that menu.

Summary of Contents for ROBOTIC AUTOLOADER 3.6.0

































































Search results

Summary of Contents for ROBOTIC AUTOLOADER 3.6.0

Reviews:

Related manuals for ROBOTIC AUTOLOADER 3.6.0

Brands by name

Popular brands

Vinpower ROBOTIC AUTOLOADER 3.6.0, User Manual

Search results

Summary of Contents for ROBOTIC AUTOLOADER 3.6.0

Reviews:

Related manuals for ROBOTIC AUTOLOADER 3.6.0

Brands by name

Popular brands