- 13 -
Step 2:
Press
ENT/Enter
button to enter the
Hard Drive Setup
menu.
If the current source is not Hard Drive, you will see the screen below. Please press the
ENT/Enter
button once to proceed.
Once you’ve entered the
Hard Drive Setup
menu, you will see following screen:
Step 3:
Use the
Up or Down button
to locate the
Load Partition
menu; as shown in the
reference screen shot below.
Step 4:
Press the
ENT/Enter
key to enter the
Load Partition
menu and you should see the
following screen.
You have a choice when loading your master disc content into the hard drive by pressing the
up or down button to find your desired partition naming method:
Option 1:
A new partition/image
Screen Shot (New Partition)
Option 2:
Overwrite one of the existing partitions/images (if any exists, including the reserved
partition/image)
Screen Shot (Overwrite)
Option 3:
Choose Auto Generate to have the system automatically generate a partition/image name
for you.
Screen Shot (Auto Gen)
Hard Drive Setup
1.Select Partition
Hard Drive Setup
2.Load Partition
Select HDD as source
OK?
Load Partition[160GB]
Load
►
New Partition
160GB
indicates
the
total
available
capacity
of
the
system’s
hard
drive
–
this
number
will
vary
based
on
the
size
of
the
hard
drive
installed
in
your
duplicator.