background image

                                                       

 

                       

 

- 27 -

Warranty  

 
 

Thank you for choosing a Vinotemp cooling unit. 

 
Please enter the complete model and serial numbers in the space provided: 

 
Model_________________________________________________________ 
Serial No.______________________________________________________ 

 
Attach your purchase receipt to this owner’s manual. 

 

 

1.  Limited Warranty 

         
 
VINOTEMP warrants its products to be free from defects due to workmanship or 
materials under normal use and service, for twelve months after the initial sale. If 
the product is defective due to workmanship or materials, is removed within 
twelve months of the initial sale and is returned to VINOTEMP, in the original 
shipping carton, shipping prepaid, VINOTEMP will at its option, repair or replace 
the product free of charge. Additionally VINOTEMP warrants all parts to be free 
from defects for a period of sixty months after initial sale. 
 
This warranty constitutes the entire warranty of the VINOTEMP with respect to its 
products and is in lieu of all other warranties, express or implied, including any of 
fitness for a particular purpose. In no event shall VINOTEMP be responsible for 
any consequential damages what is so ever. Any modification or unauthorized 
repair of VINOTEMP products shall void this warranty. 
 
 

Service under Warranty 

 
This service is provided to customers within the continental UNITED STATES 
only. VINOTEMP cooling units are warranted to produce the stated number of 
BTU/H. While every effort has been made to provide accurate guidelines, 
VINOTEMP can not warranty its units to cool a particular enclosure. 
             
In case of failure, VINOTEMP cooling units must be repaired by the factory or its 
authorized agent. Repairs or modifications made by anyone else will void the 
warranty. 
             
Shall a VINOTEMP cooling unit fail, contact the dealer for instructions, do not 
return the unit to the factory without authorization from VINOTEMP. If the unit 
requires repair, re-pack it in the original shipping carton and return it to the 
factory, shipping prepaid. VINOTEMP will not accept COD shipments. If the unit 

Summary of Contents for WM-1520HZD






























Reviews: