background image

Warranty 

 

 

 

 

 

Thank you for choosing a Vinotemp cooling unit.

 

 

 

Please enter the complete model and serial numbers in the space provided:

 

 

 

Model_________________________________________________________ 

 

Serial No.______________________________________________________

 

 

 

Attach your purchase receipt to this owner’s manual.

 

 

 

 

 

1.  Limited Warranty

 

        

 

 

 

VINOTEMP warrants its products, parts only, to be free from defects due to 
workmanship or materials under normal use and service for twelve months after 
the initial sale. If the product is defective due to workmanship or materials, is 
removed within twelve months of the initial sale and is returned to VINOTEMP, in 
the original shipping carton, shipping prepaid, VINOTEMP will at its option, repair 
or replace the product free of charge. 

 

 

 

This warranty constitutes the entire warranty of the VINOTEMP with respect to its 
products and is in lieu of all other warranties, express or implied, including any of 
fitness for a particular purpose. In no event shall VINOTEMP be responsible for 
any consequential damages what is so ever. Any modification of VINOTEMP 
products shall void this warranty.

 

 

 

 

 

Service under Warranty

 

 

 

This service is provided to customers within the continental UNITED STATES 
only. VINOTEMP cooling units are warranted to produce the stated number of 
BTU/H. While every effort has been made to provide accurate guidelines, 
VINOTEMP can not warranty its units to cool a particular enclosure.

 

            

 

In case of failure, VINOTEMP cooling units must be repaired by the factory or its 
authorized agent. Repairs or modifications made by anyone else will void the 
warranty.

 

            

 

Shall a VINOTEMP cooling unit fail, contact the dealer for instructions, do not 
return the unit to the factory without authorization from VINOTEMP. If the unit 
requires repair, re-pack it in the original shipping carton and return it to the 
factory, shipping prepaid. VINOTEMP will not accept COD shipments. If the unit 

-31-

Summary of Contents for WINE-MATE WM-2520SSH


































Reviews: