9
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
3.
Unscrew and transfer pins (4) and (3) of the hinge plate to the opposite side. (Fig. 1)
4.
Pop out the cover caps on the left side of the cabinet and use them to
cover the screw
holes on the right hand side.
5.
Screw the alternative left top hinge (8), included in the fittings,
on the left hand side of the
cabinet. (Fig. 3)
6.
Relocate the door to the designated position. Then screw the bottom hinge assembly on the
left designated position and tighten it after the door is leveled. (Fig. 1)
OPERATING YOUR APPLIANCE
CONTROLS
ON/OFF Power
To turn the appliance ON or OFF, touch the symbol and hold for 5 seconds.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is
on.
LIGHT
Turn the interior light ON/OFF.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC
Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the
temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the
LIGHT
key for 5 seconds.
SETTING THE TEMPERATURE
You can set the temperature by touching the
UP
and
DOWN
symbols. When you push the
two buttons for the first time, the LED readout will show the original temperature set
previously. (The temperature preset at the factory is 38°F (3°C)).
The temperature you are setting will increase by one degree each time you touch the
UP
symbol, and will decrease by one degree each time you touch the
DOWN
symbol.
The range of the temperature control is from 36°F to 43°F.
To view the set temperature at any time, touch the
UP
or
DOWN
symbol. The set
temperature will flash for 5 seconds. After 5 seconds, the temperature inside the unit will
reappear in the display.
