Vinotemp VT-ICEMAKER15 Owner'S Manual Download

Page: 16 / 16

1
6

W W W . V I N O T E M P . C O M

SERVICE & IMPORTANT NOTICE

Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged.

Contact our customer service at 1-800-777-8466 or [email protected].

The manufacturer has a policy of continuous improvement on its products and
reserves the right to change materials and specifications without notice.

WARNING:

Please do not place the unit within reach of children.

For adult use only.

Contact

[email protected]

with any questions or visit

www.vinotemp.com

17621 S. Susana Road

Rancho Dominguez, CA 90221

www.vinotemp.com

Vinotemp is a registered trademark of Vinotemp International. All products, features, and services are subject to

change without notice. We cannot guarantee the accuracy of the contents of this document. We disclaim liability for

errors, omissions, or future changes.

Summary of Contents for VT-ICEMAKER15

















Search results

Summary of Contents for VT-ICEMAKER15

Reviews:

Related manuals for VT-ICEMAKER15

Brands by name

Popular brands

Vinotemp VT-ICEMAKER15, Owner'S Manual

Search results

Summary of Contents for VT-ICEMAKER15

Reviews:

Related manuals for VT-ICEMAKER15

Brands by name

Popular brands