Vinotemp VT-DSODREF Manual Download Page 16

Cleaning and care 

Cleaning the appliance 

Before cleaning the appliance, 
disconnect it from the power   
source. 

 

„

  Wipe the internal surfaces of the 

appliance with a soft sponge lightly dipped 
in a solution of table salt. (Add 2 table- 
spoons of salt to a quart of warm water.) 

„

  Wash the shelves in warm water with a 

small amount of kitchen dishwashing 
liquid, rinse and wipe dry. Allow the 
wooden shelves (if the appliance has 
them) to dry completely before returning 
them to the wine cooler. 

„

  Use a glass cleaner to clean the glass 

surfaces and a commercially available 
stainless steel cleaning agent for the 
stainless steel surfaces. 

„

  All parts that you wash with a soft sponge 

lightly dipped in water must be wiped dry. 

„

  Wipe the outer surface with a soft sponge 

lightly dipped in a dilute solution of 
dishwashing liquid in water. Wipe dry 
using a clean cloth. 

„

  Dust and liquids can cause gaskets to 

stick to the cabinet and tear when you 
open the door. Wash each door gasket 
with a mild detergent and warm water. 
Rinse and dry thoroughly after cleaning.

 

 

„

  Do not use steel wool or sponges with 

steel wool on stainless steel surfaces. 
They could damage the surface. 

„

  Do not use cleaning waxes, concentrated 

cleaning agents, bleaches or cleaning 
products containing kerosene on the 
plastic or rubber parts. 

„

  Never use paper towels or window 

cleaners on the plastic parts.

 

Moving 

„

  Before moving the appliance, remove all 

contents.

 

„

  Secure freely moving parts inside the 

appliance (racks), e.g., using adhesive 
tape.  

„

  To prevent damage, screw in the leveling 

feet.

 

„

  Tape the door(s) shut. 

„

  Ensure that the appliance always remains 

in a vertical position while being 
transported. To prevent the appliance from 
being damaged during transportation, 
cover it with a blanket or other soft cloth.

 

Energy-saving tips 

„

  Locate the appliance away from sources 

of heat and out of direct sunlight.

 

„

  Ensure sufficient ventilation. Under no 

circumstances should you cover the 
ventilation openings. 

„

  Only open the door when necessary. Do 

not leave the door open for a long time or 
open the door too often.

 

„

  If the appliance will not be used for 

several months, remove all items and turn 
off the appliance. Clean and dry the 
interior thoroughly. To prevent odor and 
mold growth, leave the door(s) open 
slightly, blocking open if necessary. 

 

 

 

 

 

11 

Summary of Contents for VT-DSODREF





















Reviews: