Operation
Operating conditions
Proper operation of the appliance is
guaranteed only if the following conditions
are met:
Maximum ambient relative humidity:
RH75%.
The appliance must be placed at a
sufficient distance from heat sources ( e.g.,
ovens, central heating, direct sunlight,
etc.).
The appliance must be located in such a
place that it is protected against the
effects of weather.
Regular maintenance is performed
according to the instructions in this user’s
manual.
The ventilation openings in the cover of
the appliance must not be covered by
anything.
Correct installation ( e.g., leveling, the
capacity of the system corresponds to the
specifications on the rating label of the
appliance).
Control elements
For Models : VT- DSODREF/
VT- DSODREF-L
1) “
” button
To turn the unit ON and OFF, press and hold
this button for approximately 3 seconds.
2)
“
” button
Energy conservation button: Pressing this
button for 3 seconds will turn the energy
conservation mode on or off. In this mode, the
LED light and display will turn off, and the
°
C/
°
F light will be on.
8
3)
“
“
indicator light
Shows that the compressor is in operation.
4
) “°C/°F”
indicator light
The temperature scale is changed by
pressing the
°
C/
°
F
button.
5)
“
”
button
Used to increase (warm) the temperature in
steps of 1
°
F (or 1
°
C).
6) “ ” button
Used to decrease (cool) the temperature in
steps of 1
°
F (or 1
°
C).
7)
“
°C/°F
”
button
Press this button to switch the indicator light
between
°
C and
°
F.
8)
LED display
Display screen shows the temperature setting.
Setting the temperature
Insert the power plug into a properly grounded
power socket.
Use the buttons to set the desired
temperature of the appliance. Each time the
buttons are pressed, the temperature
will increase / decrease by 1
°
F (or 1
°
C).
You can set the temperature in the range of
36°F to 50°F (or 2°C to 10°C).
