CONNECTION
1.
After removing the packing materials, there should be three items:
a.
Wine Bottle Chiller/Warmer unit
b.
Power supply cord
c.
Insulation sleeve
2.
Plug the Unit Input Plug from the power supply cord into the Input Plug Socket
located on the back of the unit. Then connect the Wall Outlet Plug into the nearest
wall outlet. The default temperature is set is “min” and the blue LED light on the
control panel will turn on after 5 seconds.
OPERATING INSTRUCTIONS
You may press the “Up” button (fig. 1) or
the “Down” button (fig. 2), located on the
front of the unit, to select your desired
temperature. The 10 green LED indicating
lights will show your temperature selection.
The sensors inside the unit detect the
temperature of the aluminum container
and the CPU will compare the set
temperature to decide whether the unit
should be “cooling” or “warming.”
“Cooling” – If the temperature of the
aluminum container is higher than the set
temperature set, the blue “Cooling” LED
light, located on the front of the unit, will
be on (fig. 3).
“Warming” – If the temperature of the
aluminum container is lower than the set
temperature, the red “Warming” LED,
located on the front of the unit, will be on (fig. 4).
When the temperature of the aluminum container has reached the set temperature, the
blue and red LED lights on the control panel will both turn off – leaving only the green LED
light that indicates the set temperature will be on.
It takes the sensor 5 seconds to switch from warming to cooling mode, and vice versa.
The main function of this unit is not only to “cool” or “warm” the wine bottle but also in
maintaining the temperature. Please note that white wine that has been chilled in the
refrigerator before placing it in the Chiller/Warmer will shorten the chilling time in the unit,
Otherwise it will take 1 hour to cool.
For faster cooling or warming, the insulation sleeve provided may be used to cover the top
part of the bottle.
For wine bottles that are smaller than 3.5 inches, we recommend the bottle be placed off
center so that the bottle can be in contact with the wall of aluminum container for
effective cooling. The shape of the insulation sleeve can be altered.
5
1 7 6 3 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
