8
W W W . V I N O T E M P . C O M
OPERATING YOUR WINE COOLER
TEMPERATURE CONTROL:
The control panel features an easy to read LED digital display and two buttons that allow you to adjust
the temperature of your wine cooler.
IMPORTANT:
In order to operate efficiently, this product should be in an environment with an
ambient temperature of less than 90°F (32°C).
•
To turn ON your wine cooler, press the
button for 3 seconds. The LED will flash “---“.
•
To turn OFF your wine cooler, press the
for 3 seconds.
•
To set the desired temperature, press the
button for 3 seconds. The current temperature
will flash. Use
button and
to lower or raise the temperature in 1° increments. The
temperature range for this cooler is 41°- 64°F.
•
Once the desired temperature has been set, the display will flash the desired temperature and
will then change to the current temperature.
•
The cooling light
will turn on when the cooler is in cooling mode.
•
The heating light
will turn on when the cooler’s temperature has been set to increase.
•
The display will read “LL” when the temperature has dropped below 39°F.
HOW TO USE THE RUBBER SEAL AND COVER
This cooler is intended for use with standard wine bottles with a diameter of approximately 2.8 - 3.1
inches. While inserting the bottles into the cooler, hold down the rubber seal to ensure the bottles are
held securely. If you do not need to use all 8 spaces, cover the unused spaces using the provided
cover to prevent cold air from leaking out of the unit.
