12
W W W . V I N O T E M P . C O M
IMPORTANT
: Always unplug the unit before cleaning or performing maintenance. Never use harsh
cleansers or scouring pads to clean any part of the unit.
•
Turn off the power, unplug the appliance, and remove all items including shelves.
•
Wash the shelves with a mild detergent solution.
•
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
•
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
•
Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless
steel with steel particles and rusting may occur.
•
Do not connect or disconnect the electric plug when your hands are wet.
•
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion.
•
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
MOVING YOUR WINE COOLER
Before moving your wine cooler, first be sure to remove all items from the cooler.
•
Securely tape down any loose items, such as shelves, inside the unit.
•
Turn the levelling legs up to the base to avoid damage.
•
Tape the door shut.
•
Ensure that the unit stays securely in the upright position during transportation. Protect the
outside of the appliance with a blanket or similar item.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be off for a
longer period of time, you need to take the proper steps to protect your contents.
INACTIVITY
If the unit will not be used for a period of less than three weeks, leave the cooler operating. If the
period of inactivity is several months, remove all items and turn the unit off. Clean and dry the interior
thoroughly. Leave the door open slightly to prevent any possible moisture build-up.
ENERGY SAVING TIPS
•
The appliance should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
•
Ensure that the unit is adequately ventilated. Never cover air vents.
•
Only open the door for as long as necessary.
CAUTION: Failure to unplug the appliance could result in electrical shock or personal
injury.
