Problem
Possible Causes
Solutions
Chiller does not
operate.
•
Not plugged in
•
The appliance is turned off.
•
Low voltage
•
Fuse broken
•
Plug the unit.
•
Turn the unit on.
•
Ensure voltage is normal.
•
Change fuse.
Chiller is not cold
enough.
•
The beverage cooler is
placed
too
near
heat
source.
•
Bad ventilation.
•
Fans don’t work.
•
The door is not closed
tightly
or
opened
too
frequently or for too long
time.
•
Keep the beverage cooler
away from sunshine or other
heat source.
•
Place the beverage cooler in
the area with good ventilation
and keep things away from the
fans.
•
Check whether the plug is
connected or change the fan.
•
Close the door tightly and don’t
open the door too frequently or
for too long time.
The compressor
turns on and off
frequently.
•
The room temperature is
hotter than normal.
•
A large amount of contents
has been added to the
chiller.
•
The door is opened too
often.
•
The door is not closed
completely.
•
The temperature control is
not set correctly.
•
The door gasket does not
seal properly.
•
Close the door properly.
•
Check the door gasket.
The fans turn on
and off frequently.
In order to circulate the air and maintain the set temperature inside the cabinet
the fans must cycle on and off even when the compressor is off. The fans will
cycle ON and OFF while the compressor is off approximately every 10 seconds,
this is called “Semi-speed status”. This cycle is normal and meant both to
circulate the air as well as ensure the continued operational status of the fans. If
the fan stops completely and does not complete this cycle the fan is non-
operational.
The light does not
work.
•
Not plugged in
•
Fuse broken
•
The light button is “OFF”.
•
Plug the unit.
•
Change fuse.
Vibration
•
The chiller is not leveled.
•
The cans are vibrating.
•
There is an object under the
chiller.
•
Check to assure that the unit is
level.
•
Make sure the cans don’t touch
each other.
•
Remove the object.
