10
W W W . V I N O T E M P . C O M
INSTALLING THE STAINLESS STEEL HANDLE
This wine cellar includes a stainless steel handle that is not required to operate this unit.
To install the handle please follow the below instructions:
•
Pull away the door gasket in the area where
the handle is to be installed - you can see
two designated holes for handle installation.
The gasket is easily displaced by hand, no
tools are necessary.
•
Install the handle tightly as shown below
with the two screws, lock washers and flat
washers provided. (DO NOT over tighten as
this will cause damage to the handle
assembly and stainless steel surface of
glass door).
•
Replace the door gasket to its original position.
OPERATING YOUR WINE COOLER
CONTROLS
1.
Light: turn the inner light ON or OFF.
2.
ºF/ºC Selector: choose to display temperature setting in
Fahrenheit or Celsius.
3.
To view the set temperature at any time, please press the
button. The set temperature will temporarily flash in the LED
display for 5 seconds.
4.
Temperature display for the lower zone: the LED display will flash when
setting the temperature. When not setting the temperature (normal
mode), this display will show the current temperature for the lower zone.
!
