REVERSING THE DOOR SWING OF YOUR APPLIANCE
This unit has the capability of the door opening from either the left or right side. The unit is delivered to you with
the door opening from the left side. Should you desire to reverse the direction in which the door opens, please
follow these instructions:
NOTE
: All parts removed must be saved to allow the door swing to be reversed.
• Open the glass door and remove the two lock screws (2) holding the door shaft assembly (3) to the
glass door. Be careful to hold the glass door firmly after removing the screws. (Fig. 1)
• Pull down to remove the glass door and place it on a padded surface to prevent scratching it.
• Remove the two screws from the door bottom at left side and install them to the door bottom at right
side. (Fig. 3)
• Remove the lower door hinge (1) and turn around 90°, then install it at the designated position on
the left side. And install the door shaft assembly (3) accordingly. (Fig. 2)
• Remove the upper hinge cover (4) and remove the four screws (5) that are used to fix the upper
hinge (6) to the cabinet top. Then remove the upper hinge and install it at the designated position
on the left side. (Fig. 4)
• Set the glass door into the designated position, and install the two lock screws (2) to connect the
door shaft assembly (3) with the glass door and tighten them before the door is leveled. (Fig. 5)
• Remove the handle from the left side of the door and install it on the right side.
9
Summary of Contents for element EL-155SDWS
Page 21: ...21...
