10
W W W . V I N O T E M P . C O M
INSTALLING THE HANDLE
This refrigerator includes a handle that is not required to operate this unit. To install the
handle please follow the below instructions:
Locate the handle (1) over the pin (3) of the door and tighten the handle by screwing the
Allen key grub screws (2).
The refrigerator should be placed in a position where the ambient temperature is between
41 - 100°F and the humidity level is between 45 -90%. If the position is above or below this
range, the performance of the unit may be affected. For example, placing your unit in
extreme cold or hot conditions may cause interior temperature to fluctuate.
NOTE:
•
When you use the refrigerator for the first time or restart the unit after having been shut
off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal and it is due to the length
of the activation time. Once the fridge/ cooler is running for a few hours everything will be
back to normal.
•
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the fridge will not start.
OPERATING YOUR FRIDGE
CAUTION:
Do not over tighten the screws