10mm
25mm
AILERON STROKE
ELEVATOR STROKE
RUDDER STROKE
10mm
12mm
12mm
25mm
13-Control surface
CG
WARNING ! Securely install the receiver and power pack, ensuring
they will not come loose or rattle during flight.
Never fly before checking the Cg’s required position.
In order to obtain the CG specified, reposition the receiver and power pack
89mm
Wing center section
14-Balance
WARNING:
- In the beginning, first time fliers should always be assisted by an experienced flier and never fly alone.
- This model aircraft is designed to be powered by a 2 cycle .40 ~ .46 engine or a 4 cycle .48 ~ .52 engine. Installing
a more powerful engine than specified or flying the DREAM LIKE aggressively may lead to serious damages and
accidents.
WARNING:
Please do not clean your model with pure alcohol, only use liquid soap with water or use class
cleaner to clean on surface of your model to keep the colour not fade.
ELEVATOR
AILERON
RUDDER
14-Pre-Flight check
Check that each clevis is securely snapped into position.
Check that all servo horn screws are tight.
Charge the transmitter and receiver battery.
