STENTOFON and VINGTOR products are developed and marketed by Zenitel Norway AS. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001:2008. Zenitel Norway AS
reserves the right to modify designs and alter specifications without prior notice, in pursuance of a policy of continuous improvement. © 2012 Zenitel Norway AS.
DOC NO..
9.10.2012
A100K11336
●
Click
Add
followed by
Save
2.8.2
Configure IP telephone
You now have to log into the 3rd-party IP telephone to
configure the SIP account to register it with the Pulse Server
station. The Directory Number and Password (SIP Account)
created in section 2.8.1 is used to register the 3rd-party
station with the Pulse Server.
2.9
Add SIP Accounts for Telephone Gateways
2.9.1 Install license
Before adding SIP accounts to your system, you need to
obtain the
Pulse Gateways
license key and install it under
Station Administration
>
Licensing
.
2.9.2
Create SIP gateway account
●
Under the
Server Management
tab, select
Server
Configuration
>
Directory Settings
When a valid Pulse Gateway license has been installed, the
Gateways
parameter will be available.
●
Under
Gateways
set the following values:
- Directory Number:
0
- Name: <name of your choice>
-
Profile:
Gateway
●
Click
Add
followed by
Save
L
Directory Number 0 is optional as you can use any number to
make external calls through the Gateway
2.9.3
Configure telephone gateway
Log into the Telephone Gateway to register it to the Pulse
Server by using the SIP Gateway Account created in section
2.9.2.
3 LEDs on Station Front Plate
Status LEDs
-
Bell icon
lights
yellow
when a call is placed and ringing
-
Talk icon
lights
green
when a call is active and in
conversation
-
Door icon
lights
red
when the door is unlocked or relay is
active
Talk Icon: Flashing at 1 second intervals
- Station has no connection to the AlphaCom
Possible reasons
:
- No connection to Ethernet
-
Wrong AlphaCom XE IP address configured
- Invalid IP address
- No gateway or wrong gateway to the
AlphaCom server/exchange
Talk Icon: Flashing at 5 second intervals
- Station connected but NOT registered in the
AlphaCom server/exchange.
Reason
:
- Station has not been programmed in
AlphaPro
4
Restoring Default Settings
4.1
Reset to Default with Activated DHCP
To reset:
1. While
pressing
any button
, power up the
station by connecting to a PoE switch.
2. Hold the button until the station audio starts
counting, and release the button on
count 1
.
3. Press and hold the button on
count 5
and
release on
count 0
.
4. Press the
call button
to make the station
speak its IP address.
Default values
- Station IP address: (determined by DHCP server)
- Username:
admin
- Password:
alphaadmin
4.2
Reset to Default with Static IP
To reset:
1. While
pressing
any button
, power up the
station by connecting to a PoE switch.
2. Hold the button until the station audio starts
counting, and release the button on
count 1
.
3. Press and hold the button on
count 3
and
release on
count 0
.
4. Press the
call button
to make the station
speak its IP address.
Default values
- Station IP address:
169.254.1.100
- Username:
admin
- Password:
alphaadmin
5
Station Software Upgrade
1. Start the TFTP server program and click
Browse
to select
the folder containing the software image files
2. Log on to the IP station web interface
3. Select
Station Administration
>
Manual Upgrade
4. Enter the IP address of the
TFTP server
(your PC’s IP
address)
5.
Enter the prefix (e.g.
tsi-3.x.x.x)
to the software image
files in the
Image file
field
6. Click
Save settings
to store the data
- The station will now try to contact the TFTP server. If the
response is
TFTP_CONN_OK
the settings are saved, and
the
Upgrade
button will appear.
7. Click the
Upgrade
button to upgrade the software on the
IP station.
- The upgrade procedure takes about 3 minutes.
1, 2, 3, 4, 5
1, 2, 3