73
Turbine Station Configuration Guide
A100K11194
11 Restoring Factory Defaults
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the
password to the station web interface is forgotten. The defaults can either be set to Activated DHCP
or Static IP.
11.1 Reset to Factory Default Settings with Activated DHCP
To reset:
1.
While
pressing
any button
, power up the station by connecting to a
PoE switch.
2.
Hold the button until the station audio starts counting, and release
the button on
count 1
.
3.
Press and hold the button on
count 5
and release on
count 0
.
-
if there is no 0 count, the procedure has failed and you have to start again
4. Press the
call key
,
number keys
or
DAKs
to make the station
speak its IP address.
Factory default values
Station IP address: (determined by DHCP server)
Username:
admin
Password:
alphaadmin
11.2 Reset to Factory Default Settings with Static IP
To reset:
1.
While
pressing
any button
, power up the station by connecting to a
PoE switch.
2.
Hold the button until the station audio starts counting, and release the
button on
count 1
.
3.
Press and hold the button on
count 3
and release on
count 0
.
-
if there is no 0 count, the procedure has failed and you have to start again
4. Press the
call key
,
number keys
or
DAKs
to make the station speak its
IP address.
Factory default values
Station IP address:
169.254.1.100
Username:
admin
Password:
alphaadmin
1, 2, 3, 4, 5
1, 2, 3
Summary of Contents for ECPIR-3P
Page 1: ...TECHNICAL MANUAL Turbine IP Intercoms TCIS TCIV TFIE TFIX TMIS ECPIR 3P A100K11194 PRE 14 0029...
Page 22: ...22 A100K11194 Turbine Station Configuration Guide 3 6 Turbine Relay Module TA 10...
Page 77: ...77 Turbine Station Configuration Guide A100K11194 A 6 Front Board Front A 7 Front Board Rear...
Page 79: ...79 Turbine Station Configuration Guide A100K11194...
