flowSCREW 4w
packages
Copyright Vincotech
Handling Instruction
03
rem. sect. 5.2; mod. at sect. 5.1 29.09.2014
Gyimóthy Zs.
Gyetvai T.
FSWB-M-*-HI
Page
18 /
18
02
remove section 6.2
14.05.2014
Gyimóthy Zs.
Gyetvai T.
01
20.02.2014
Gyimóthy Zs.
Gyetvai T.
Ver.
Alteration
Date
Des. / Mod.
Appr.
10.2 Hand soldering parameters
Max. solder iron temperature:
350 °C
Max. contact time with component lead: 10 s
Number of heat cycles: 3
11 Accessories and application support
Vincotech offers the following application boards for products with
flow
SCREW 4w packaging:
o
Interconn-M200-P2 (mounted with 4 screws)
o
Interconn-M200-P4 (mounted with 8 screws)
o
GD-M200-MASTER (master driver board)
o
GD-M200-SLAVE (slave driver board)
Please contact the local sales or distribution office for samples of and documentation on these
adapter boards.
12 ESD protection
Modules are sensitive to electrostatic discharges because these can damage or destroy
sensitive semiconductors. Semi-conductive plastic trays in the shipment box protect all
modules against ESD. We recommend wearing a conductive grounded wristlet and working at
a conductive grounded station when handling and assembling modules.
The modules' ESD sensitivity levels pursuant to the ESD Association's classification are as
follows:
ESD STM5.1-1998 Human Body Model:
Class 0
ESD STM5.2-1999 Machine Model:
Class M1
ESD STM5.3.1-1999 Charged Device Model: Class C1
Please also comply with the EN61340-5-1 and ANSI S20.20 standards when handling devices
that are sensitive to electrostatic discharges:
13 Disclaimer
The information given in this document should not be used in substitution for the
customer’s
tests because the conditions and circumstances of the application are beyond Vincotech's
control. The content of this document is true and accurate to the best of our knowledge,
reflects current standards, and has been compiled with due care.
