12
305001-002-101-102 G20E
ATTENTION:
The above cases should be handled only by specialized technicians.
ATTENTION:
It’s strictly forbitten to touch, to regulate or repair the internal part of the thermomagnetic gas valve,
the gas tubes and the burners that is located inside the metallic body (1), under the grades (2) of the machine
Fig A, or under the cooking cabinet of the oven.
INSPECTION:
The gas supply tubing or hose used for the connection of the appliance, shall comply with the
national requirements in force and it shall be periodically inspected every month, for gas leaks and their good
condition and be replaced if necessary.
INSPECTION:
The function of the machine and the good condition of all the parts must be inspected every
month. Specially, the blue color of the flame of the top burners must be inspected every day. The stability of the
casseroles and the pans on the grades must be inspected every month. In case of deformation the grates must
be replaced. The smooth rotation of the knobs of the valves must be inspected daily and to be replaced in case of
malfunction or gas leak. Also, the good condition of the inside surface of the cooking cabinet of the oven and the
griddle gliders, must be inspected every day if they are cleaned, broken or damaged.
INSPECTION & GREASING:
The thermomagnetic gas valve must be inspected for inside greasing, once per year
but only by specialized technicians.
BE IN CONTACT WITH VIMITEX FOR DETAILED INSTRUCTION.
E. ASSEMBLING – DISASSEMBLING SPARE PARTS
The following procedure is followed having the gas supply closed.
To change the thermocouple, gas tap, burner or the injector of the oven you must first remove the bottom of the
cooking cabinet (11) of the appliance (1) Figure A-Oven. Afterwards, you unscrew the 4 screws that holds the cover
on the left external side panel, that helps you to have an easier access on the valve and the tubing.
For the changes you can follow the instructions of the chapter A4.
To replace a burner (5), Fig. D, you must unscrew the two screws that hold it.
After the changes, you place back the cover on the left external side panel (1) Figure A and afterwards the bottom
of the cooking cabinet (11) in its place.
The above cases must be undertaken only by a specialist technician, taking into account all the present
instructions.
