VIMCOM ES-2226C, User Manual

Page: 80 / 291

Publication date: March, 2008
Revision A1
64
3-7-1. IGMP Setting
Function name:
IGMP Setting
Function description:
IGMP is used to snoop the status of IP multicast groups and display its
associated information in both tagged VLAN and non-tagged VLAN networks.
Enabling IGMP with either passive or active mode, you can monitor the IGMP
snooping information, which contains the multicast member list with the
multicast groups, VID and member port.
Parameter description:
IGMP snooping mode selection:
The switch supports to enable IGMP snooping function
Enable:
Set “Enable” mode to enable IGMP Snooping function.
Default: un-enable.
Unregistered Multicast Flooding :
The switch supports to enable Unregistered Multicast Flooding function
Enable:
Set “Enable” mode to enable IGMP Snooping function.
Default: Enable
General Query Interval :
The general query interval is the amount of time in seconds between
IGMP General Query messages sent by the router (if the router is the
querier on this subnet).
Available value: 1-2000 sec
General Query Max Response Time :
The Maximum Response Time field is only used in general or group-
specific query messages. The Maximum Response Time is configured as
the value for the Query response interval setting
Available value: 1-10 sec
General Query Timeout :
The General Query Timeout field is the amount of time in seconds.
Available value: 1-30 sec
Specific Query Count :
To set Specific Query Count on Switch .
Available value: 1-10 times
Specific Query Max Response Time :