Page 1
shading solutions by
VIMCO
TM
Description
The
Sivoia
®
SV-CP Coupled Pin Kit (to be used in
conjunction with an SV-MDU-20) allows a single Motor Drive
Unit (MDU) to drive more than one shade.
Important Notes
1. All shades controlled by the MDU must be the same height.
2. All shades must be made of the same fabric to ensure
hembar alignment.
3. The total combined fabric from all shades connected to the
MDU must not exceed 100 sq. ft. (30.5 sq. m).
4. The maximum width allowed for each tube in the coupled
system is 10 ft. (3.05 m).
5. All shades must be driven along a single axis (no off angle
positioning).
6. The MDU can be configured to operate from the left or right
side. See the original MDU Installation Instructions for
details.
Required Tools:
Parts Included With This Kit:
Expanded View of the Coupled Shade System
■
9/64" (3.6 mm) Hex
Wrench (T-bar style
preferable)
SV-CP
Coupled Pin Kit
Coupled Shade System
with End Motor
■
#2 Phillips Screwdriver
■
Tape Measure
■
Power Drill: Drill Bits, Screwdriver Attachments
■
Level
Idler Support (x2)
2” Pan-Head Mounting
Bracket Screws (x8)
1/2” Idler and
MDU Truss-
Head Screws
(x4)
Coupled Idler
Pin
Idler Mounting
Bracket
Ceiling-Mount
Bracket
*
Adjustable Hub
1st Shade
MDU
2nd Shade
Adjustable Hub
Coupled Idler Pin
Idler Supports
*
See the SV-MDU-20 instructions for details on installing these brackets.
Installation & Operating Instructions
Motorized Shade Systems
®
