TOC1905NUaa_0419
2/2
TRI
0
2
SYS
sarl
–
300 rue des Arts et Métiers, Pont-de-Pany, 21000 Dijon
1.1
Use
The
0
2
LINE
wall-mounted
transmitters
21020005
and
21020006
are an integral part of the
TRI
0
2
SYS
radio system. The Radio
transmission takes place at the
2.4GHz frequency, and is based on the use of the
version “
-
6 DC” of the PTM215B from EnOcean
compatible with « BLUETOOTH
®***
Low Energy » technology
.
They are particularly suited to
electrical installations which are not built-in, such as, for example: renovations, modifications to
domestic installations or offices with moveable partitions.
Note:
-
No battery or maintenance required!
-
Read the operating manual carefully before initial use.
1.2 Guarantee terms
This operating manual is an integral part of the device and our guarantee terms. It must always be
delivered to the user. We reserve the right to modify the technical design of these devices without
warning.
TRI
0
2
SYS
products are manufactured and their quality checked by making use of the
latest technologies and taking into account the applicable national and international directives. If
nevertheless a fault arises,
TRI
0
2
SYS
undertakes to remedy the default as follows, without
prejudicing the rights of the end customer that arise from the sales, contract with his reseller:
If the event of exercising of a legitimate and regular right,
TRI
0
2
SYS
, may at its sole discretion,
rectify the device fault or supply a fault-free device. Any claim beyond this and all claims for
consequential damages are excluded.
A legitimate fault exists if the device cannot be used at the time of delivery to the end customer
because of a design or manufacturing defect or if its practical use is severely limited. The guarantee
is void in cases of natural wear and tear, incorrect use, incorrect connection, where the device has
been repaired or external influence. The period of guarantee is 24 months (from the date of
invoicing). French law applies to the regulation of guarantee rights.
Observe the following points:
·
The laws, standards and directives in force.
·
Best practice at the time of installation.
·
The device operating manual.
·
An operating manual can only give general instructions. They must be interpreted in the context
of a specific installation.
The device is intended solely for use conforming to its purpose. Any repairs of modifications by the
user are forbidden! Do not use with other devices the operation of which could endanger people,
animals or property.
Note:
For more information on the technical characteristics of the wall transmitters
21020005
and
21020006
, please refer to the technical documentation of the version « -6 DC » of the PTM215B:
https://www.enocean.com/en/enocean-modules-24ghz-ble/details/ptm-215b/
* PLANA® is a registered trademark of VIMAR.
** BLUETOOTH® Low Energy.
*** BLUETOOTH® is a registered trademark of Bluetooth SIG, Inc.
4.1
installation instructions
-
Do not use outside (closed environments only)
-
Create a level surface before mounting on rough surfaces.
Unevenness may result in switch malfunctions.
-
During fitting, ensure the mounting position (
O
= top,
I
= bottom) indicated on the back of the
transmitter
(3)
.
-
NEVER install the wall transmitter in a metal casing or in the immediate vicinity of large metallic
objects. Installation on the ground or close to the ground is not recommended.
-
Do not interchange the finger(s)
(2)
of the transmitter
(3)
with others.
4.2
Installation
-
Clip the finger(s)
(2)
on to the transmitter
(3)
, then the preceding assembly on to the support
(4)
-
Use the support
(4)
as a template to mark holes for drilling.
-
Drill holes for 5mm wall plugs.
-
Secure the assembly using screws and wall plugs.
-
Position and engage the frame
(1)
on the assembly.
Note:
The wall-mounted transmitter is designed for indoor usage. Do not fit it in areas which could
come into contact with water! To clean it, wipe it with a damp cloth.
5.1 Compatibility
The compatibility with the wall transmitters
21020005
and
21020006
is ensured by the
manufacturer of the receiver(s) which will have been validated according to the technical
specifications provided by EnOcean
1
. Reference should be made to the relevant product
documentation which should describe the PTM215B as a compatible transmitter as it does not
have interoperability with the entire BLUETOOTH
®***
ecosystem.
5.2 Settings
The wall transmitters
21020005
and
21020006
are delivered with a default setting described in the
section "3.2 Default radio transmission sequence" in the PTM215B
1
user manual. This setting can
be accessed in accordance with chapter "6. NFC interface" of the PTM215B
1
operating manual
using a suitable interface as described in this document.
1
https://www.enocean.com/en/enocean_modules_2.4ghz_ble/ptm-215b/user-manualpdf/
6.1 New or existing installation
·
Check that in the operating instructions of the receiver the PTM215B is well described as a
compatible transmitter. Otherwise, contact the manufacturer of the receiver directly.
·
If the receiver functions at a shorter distance relative to the transmitter, it is subject to
interference or used outside the transmission range.
·
Search the system environment for changes that could cause the interference (for example
movement of metallic cabinets, furniture or partitions).
·
Locate the sensor or receiver in a more suitable location.
6.2 Limitation of the range of the radio signals
·
Transmitter used close to metallic objects or close to materials containing metallic elements
Observe a distance of at least 10 cm.
·
Moisture in the equipment.
·
Devices emitting high frequency signals such as audio and video systems, computer, electronic
ballasts or fluorescent tubes. Observe a distance of at least 0,5m.
6.3 Contacts
E-mail: ............................
These products can be marketed and distributed in the countries of the European Union. Hereby
TRI
0
2
SYS
declares that radio equipment
21020005
and
21020006
are in compliance with
directive 2014/53/EU, known as the RED Directive.
The full text of the EU declaration of conformity is available at the following internet address:
www.trio2sys.fr
.
D.Girard
1. General
Range in buildings
Line-of-sight
10 m range in corridors, up to 30 m in halls
Reinforced concrete
5m, through 1 wall/ceiling at most
Plasterboard / wood
10m, through 2 walls at most
2. Safety
4. Installation and initial use
6. Troubleshooting
Io6n et mise en service
3. Technical characteristics
CCcccc33.Caractéristique
General characteristics
7.
Declaration of conformity
Installation and user instructions
Complete wall-mounted transmitter compatible with
Vimar PLANA
®*
2.4 GHz BLE**
Réf.
21020005, 21020006
5. Compatibility and Settings
ion et mise en service
Radio Channel
Canaux 37..78 (37, 38, 39 default setting)
Transmission power
1.1mW max
Operating temperature
From -25°C to +65°C
Storage temperature
From -25°C to +65°C
Switching cycles
100 000
Relative air humidity
From 0% to 95%
Transmission frequency
2.4 GHZ / BLUETOOTH
®***
Low Energy
Frequencies min/max
2402 MHz / 2480 MHz
Device Configuration
NFC (ISO 14443)
EN
Non-contractual schemes
1
3
2
4
