Vimar Elvox TVCC 46613.036, User Manual

Page: 44 / 56

Use the appropriate mode according to your purposes among these three modes.
◆
ATW : Use this mode when the color temperature is from 1,800K to 10,500K.
◆
AWB : The function to search for the color which is matched well with the ambient
environment. This be used when the color temperature is from 3,000K to 7,000K.
◆
AWC→SET : After letting camera focus on the blank white paper to the best condition of
current lighting environment, press the SET button. If the lighting condition is changed,
Re-adjustment should be needed.
◆
MANUAL : Manual compensation make the more detailed control possible. First, after
adjusting the white balance using the ATW or AWB mode, change the mode into the manual
compensation mode and then press Set button. While looking at the color change of the
subject seen on the screen after setting up the proper color temperature, increase the each
value of the blue and the red.
MANUAL WB
BLUE
RED
RETURN 31
20
RET
IIIIIIIIII IIIIIIIIII
|
IIIIIIII IIIIIIIIIIII
|
NOTE
The White Balance may not be worked properly in the following conditions. If this
doesn’t work, use the AWB mode.
* When there is a very high color temperature in the circumstances of the subject.
(for example, clear sky, Sunset)
* It is very dark.
* If the camera is headed to the fluorescent light directly or if there is a drastic lighting
change, The operation of White balance may become unstable.
16
CCTV
EN