Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com
49400894C0 03 1902
By-alarm
01706
IMPORTANT NOTES
Notes for the phone numbers and for the codes enabled for the functions
• With each alarm communication call, pressing button 4 on your phone deletes any
calls to the subsequent phone numbers.
•
In order to interact remotely with the By-alarm system via a phone call or using the
By-phone App (which sends text messages) the User Code associated to this function
must be composed of 6 digits; otherwise it will not be possible to use the remote
function.
• Pressing button 3 takes you straight into User Telemanagement.
RFA Function - Remote Function Access
a) Call the system from a remote telephone.
b) Wait for the prompt to enter the Code.
c) Enter the digits of the User Code.
d) Once the Code has been recognized, you can access the functions that will be
directly invoked by the voice guidance on line.
•
Note
: The code that allowed access must be enabled to access the functions.
Skipping voice mail or fax
1) Call the system's number; hang up on the first ring of the phone.
2) Call back after 10 s and no later than 30 s.
3) On the first ring, the control panel will respond with the prompt to enter the Code.
4) Continue the procedure following the previous point c).
INSTALLATION RULES
• Installation should be carried out by qualified personnel in compliance with the current
regulations regarding the installation of electrical equipment in the country where the
products are installed.
• The module should be installed on control panels art. 01700, 01700.120, 01703,
01703.120.
REGULATORY COMPLIANCE
Standards EN 50131-3, EN 50131-10, EN 50136-2.
RED directive.
Standards EN 60950-1, EN 50130-4, EN 61000-6-3, EN 301 489-52, EN 301 511,
EN 62311.
Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is on the product sheet available at the
following Internet address: www.vimar.com.
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the
product must not be included with other general waste at the end of its working life.
The user must take the worn product to a sorted waste center, or return it to the retailer
when purchasing a new one. Products for disposal can be consigned free of charge
(without any new purchase obligation) to retailers with a sales area of at least 400 m
2
, if
they measure less than 25 cm. An efficient sorted waste collection for the environmen-
tally friendly disposal of the used device, or its subsequent recycling, helps avoid the
potential negative effects on the environment and people’s health, and encourages the
re-use and/or recycling of the construction materials.
