2
1. DESCRIPTION
Art. 02032 is a programmable power supply unit for surface or panel mounting with omega DIN bar size 4 modules. It is equipped with an input (+I), an
output (+U) and terminals (A,B,C,D) that, appropriately connected together, determine different voltages at the output.
The power supply unit is used for:
1- Parallel video door entry unit power supply
2- Power supply of video camera and video distributors
3- Video amplifier power supply
2. CHARACTERISTICS
• Power supply voltage 230Va.c. 50Hz
• Maximum input power: 35VA
• Protection of the primary winding of the transformer: PTC SIEMENS TYPE C860.
• Protection of the internal electronics and shorting on the outputs: PTC SIEMENS TYPE C945
3. CONNECTIONS
A-B= 18 V d.c. not stabilized with piloting 0.8A, intermittent cycle 90 sec ON 90 sec OFF
A-B-C = 13.5 V d.c. stabilized with piloting 250mA, intermittent cycle 90 sec ON 90 sec OFF
A-B-D = 10.5 V d.c. stabilized with piloting 250mA, intermittent cycle 90 sec ON 90 sec OFF
B-C = 13.5 V d.c. stabilized (always) 250mA, continuous cycle
B-D = 10.5 V d.c. stabilized (always) 250mA, continuous cycle
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Description - Characteristics - Connections
