10/16 NT00000439-KDTA-F400-KDTR-F400-AN-210121
3.4 Handling
KDTA-R Horizontal Nu
CaissonAction Transmission
Puissance
Intensité
Vitesse derotation
Product identification label
Ventilation slit
Do not obstruct
Pass the slings through
the guides
Characteristics of the unit: See product identification label on the side of the unit
3.5 Casing assembly
3.5.1 Horizontal installation
Anti-vibration pads
(fixed to floor only)
The use of anti-vibration pads is advised.
•
Installation with flexible sleeves on the air flow network is strongly
advised in order to prevent the transmission of vibrations.
• Leave a minimum distance (L) of 60cm on the transmission side
for any technical work to be performed.
• Do not obstruct the ventilation slits on either side of the unit.
3.5.2 Vertical installation
KDTA
-RH
ori
zonta
lNu
Ca
isso
nAc
tion
Tra
nsmis
sion
Puis
san
ce
Inte
nsité
Vites
sed
erota
tion
Use wide
washers (LL)
Flexible
sleeves
Only sizes 200 to 355
• Never install anti-vibration pads for a vertical attachment.
•
Installation with flexible sleeves on the air flow network is strongly
advised in order to prevent the transmission of vibrations.
• Leave a minimum distance of 60cm on the transmission side for
any technical work to be performed.
• Do not obstruct the ventilation slits on either side of the unit.
