22
Villager
VTR 690B / VTR 695B (GB)
6. MAINTENANCE
6.1
SAFETY RECOMMENDATIONS
Wear suitable clothing and strong gloves for dismantling
and refitting the blade and in all other hazardous situations for the hands.
Never use the machine with worn or damaged parts. Faulty
or worn-out parts must always be replaced and not repaired. Only use original
spare parts: The use or non-original and/or incorrectly fitted parts will
compromise the safety of the machine, may cause accidents or personal injuries
for which the Manufacturer is under no circumstance liable or responsible.
Any adjustments or maintenance operations not described
in this manual must be carried out by your Dealer or a specialized Service Centre.
Both have the necessary knowledge and equipment to ensure that the work is
done correctly without affecting the safety of the machine.
You must go to a specialized Service Centre or contact your Dealer of the
following are malfunctioning:
- The brake
- The engagement and stop of the blade.
- The drive engagement in forward and in reverse gears.
6.3 INTERVENTIONS ON THE MACHINE
6.3.1 Cutting deck alignment
The cutting deck should be properly set to obtain a good cut.
If the cut is uneven, check the tire pressure.
If this is not sufficient to achieve an even cut,
please contact your Dealer for the adjustment of
the alignment of the cutting deck.
Summary of Contents for VTR 690B
Page 79: ......
