Villager VTB 842 PRIME, Original Owner'S Manual, Page: 46 / 156

Villager VTB 842 PRIME (GB)
16
6. Front wheel
Move the motor hoes on road by the front wheel; lift the handlebars up the ground
the front wheel.
When the tiller is used in the field, move the wheel up by replacing the lock pin.
(1) WHEN USED IN THE FIELD
(2) LOCK PIN
(3) WHEN MOVED ON ROAD
7. Handling tips
Adjust the handlebar height to a comfortable position (waist height for normal
tilling). Should the machine jerk forward while tilling. Press down the handlebars. If
the machine will not move forward, move the handlebars from side to side.
Turn: The proper method of negotiating a turn during a tilling operation is to lower
the handlebars to bring the gravity centre toward the rear and then make the turn
this will permit a turn to be made with relative ease.
8. Normal operating angle
Lower the handle slightly so the front of the machine is raised about 6-8°.
To get the maximum advantage from the tiller, try to hold the machine at the angle
shown while you are tilling the ground.