Villager VLN 1506, Original Instruction Manual

Page: 27 / 123

Villager VLN 1506 (GB)
10
Light pressure on the on/off switch results in low speed, and conversely – increased pressure results in
high speed.
SELECTING THE PROGRAMME – DRILLING, IMPACT DRILLING AND CHISELING
WARNING!
Always make sure the power tool is isolated from the power supply before fitting any
attachment. The switch can be activated only when the motor has come to a complete stop. Otherwise,
the power tool may be damaged.
Selecting the drilling programme:
Note: The following pictures serve as examples, and may vary depending on the power tool model.
Unlock the drilling/impact drilling/chiseling switch and turn it to this symbol “ ” until it jumps into
place.
Selecting the impact drilling programme:
Use the switch lock to unlock the drilling/impact drilling/chiseling switch
(2) and turn it to this symbol “
” until it jumps into place.
Handle. See (Fig 1)
Always make sure the fixed handle is secured before any job takes place as a loose handle can cause
injuries.
Fig 1
Switching the chisel on/off
The chisel has an On/Off switch (Fig 2) built into the handle. Hold the chisel with both hands and simply
squeeze the trigger, and the motor will start. To switch off, release the trigger.