Villager VJS 2500, Original Instruction Manual

Page: 18 / 93

8
Villager VJS 2500 (GB)
Charging Time:
Charging time will differ based on the discharge level and the power source used
(5V/1A or 5V/2A). If charging begins from 1 Flashing LED to full charge by 5V/2A, it
approximately takes 3 hours.
Battery Status Indicator:
The indicator LEDs will flash one by one during the period of charging. Different
number of indicator LEDs shows different storage level of Villager VJS 2500.
Indicator
LEDs
Unlit
1
Flashing
1
Solid
2
Solid
3
Solid
4
Solid
Storage
Level
0% ˂ 5% 5% ~ 25% 25% ~ 50% 50% ~ 75% 75% ~ 100%
USB power
Connect the USB device to the Villager VJS 2500 with either the original cable or
the included multi-tip cable (better use original cable of Apple® for Apple®
products). Press Power button to start USB power. When disconnected, the Villager
VJS 2500 will automatically shut off. The number of times you can recharge a USB
device will vary between devices.
Flashlight
Press Power button twice to start flashlight. Press once to switch lighting modes:
Steady On
– Strobe – SOS – Off.
Service
Leave the repair of the device to qualified technical personnel. Thus, the safety of
the device is guaranteed and maintained.
Caution!
Only qualified technical personnel should change the plug or the connecting cables.
This will guarantee the safety of the device is maintained. If the product is no
longer suitable for use dispose of it in an environmentally friendly manner in
accordance with your local ordinances.