Villager VEH 250, Original Operating Instructions

Page: 26 / 156

9
Villager VEH 250 - 500 - 800 (EN)
•
It is in mechanical group M1.
•
Read and absorb the operating instructions before you use the cable hoist.
•
Ensure that the operator knows how the machine works and how it should be
operated.
•
The user should always operate as set out in the operating instructions.
•
The cable hoist is not designed for continuous operation. Its mode of operation
is: Intermittent mode without influencing the starting process.
•
The rated capacity of the machine does not vary due to the position of the load.
•
Please inspect the hook before operation is possible damaged or distortion
replace it in time.
•
The service life of the cable hoist is approximately 8000 cycles (excluding
wearing parts). When the hoist has completed 8000 cycles, all its mechanical
parts must be checked and overhauled..
•
Red Emergency Stop Switch offers additional protection under danger and in
emergency circumstances, then screw the switch head as the arrow direction to
recover operation after remove the damages.
•
Please be sure to the enough lubricant on parts. Daub the lubricant on the load
hook, cable drum shaft, gear box, and bearing every half a year.
6.1 Unpacking
After opening the packaging, inspect the frame, the steel cable, the hook and the
electric control mechanism for signs of possible transit damage.
6.2 Assembly (Fig. 5)
The cable hoist is fitted with two fastening clamps (1) with which it has to be
fastened to a rectangular tube. The dimensions of the arm must conform with the
size of the fastening clamps and must be capable of supporting twice the rated
load. We recommend that you seek advice from a qualified technician.
All screws must be tightened correctly. A qualified technician should check the
anchoring of the arm before the machine is started.