8
Villager
VEH 250
-
500
-
800 (EN)
Explanation of the symbols
Read the directions for use before operating the equipment.
Always wear hard hat.
Warning. Hot surface! Do not attempt to lift loads that exceed the rated
load.
4. Proper use
The cable hoist is designed for lifting and lowering loads in enclosed areas
commensurate with the machine’s capacity.
The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer will
be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications.
Our warranty will be voided if the machine is used in commercial, trade or
industrial businesses or for equivalent purposes.
5. Before starting the equipment
•
Before you connect the equipment to the mains supply make sure that the data
on the rating plate are identical to the mains data.
•
Always pull out the power plug before making adjustments to the equipment.
•
Please make no-loading test before start-up operation at first, and please check:
a. The flexibility of up/down operating switch to insure the controlling of the
hoisting and lowering of load hook.
b. Make sure that the upper limit braket is functioning properly. When the cable
has reached the maximum height, the lever on the automatic stopping
mechanism (5) will be actuated. The motor (14) must then stop.
c. Make sure that the lower limit braket operates properly. When the steel
cable (6) has been unwound as far as possible, the lever for the maximum cable
length (4) will be actuated. The motor (14) must then stop.
d. Any abnormal sounds when start-up operation.
e. The steel rope is possible damaged (split or bent), or reach 20 hours after
using, change the rope immediately.
•
The cable hoist is not suitable for transporting hot and/or molten masses and in
addition it is not suitable for use at low temperatures or in aggressive
atmospheres.
Summary of Contents for VEH 250
