Villager VBV 2120, Original Instruction Manual, Page: 29 / 129

12
2) Point the air flow in front of you and walk slowly forward. Allow the tube to sweep
backwards and forwards, with the opening 5
– 10 cm over the ground.
3)
Switch off the leaf blower by moving the power switch back to the OFF position.
MAINTENANCE
Warning!
Switch off the leaf blower and wait until all moving parts have completely
stopped and remove the battery before maintenance.
• Keep the air intake and ventilation openings clean and open, otherwise the motor can
overheat
•
Do not use strong detergents or solvents, they can damage the plastic parts on the leaf
blower. Clean with a soft cloth moistened with a mild detergent. Do not expose the leaf
blower to water or any other liquid.
• All the bearings in the leaf blower are permanently lubricated and no additional
lubrication is necessary.
•
If the carbon brushes are so worn out that they no longer have contact with the motor,
the carbon brushes must be replaced by a pair similar carbon brush available through the
after-sales service organization or qualified professional person.