Villager DM 14 PE, Instruction Manual

Page: 19 / 173

Villager DM 14 PE (GB)
4
Spray operation
(1) It is fine to carry out operation
during cool weather with little wind.
For example, in the early morning or in
the late afternoon. This can reduce the
evaporation and drift of chemicals and
improve the protecting effect.
(2)
Operator should move windward.
(3) If your mouth or eyes are
spattered with chemicals, wash them
with clean water and go to see a
doctor.
(4)
If the operator has a headache or
dizziness, stop working at once and go
to see a doctor in time
(5)
For the operator’s safety, dusting
must be carried out strictly according
to the instruction of the chemicals and
agricultural requirements.
(6)
If you want to stop the engine while
dusting, the dust gate must be shut at
first.
Warning
Do not direct the air blast towards
bystanders -
since the air flow can
small objects at great speed.
During operation, the
muffler or catalytic muffler
and surrounding cover may
become extremely hot. Avoid contact
during
and immediately after
operation. Always keep exhaust area
clear of flammable debris. Allow the
engine and muffler to completely cool
before performing any maintenance
activity.
After working, wash your
hands and clean all of
clothing. You know that the
remaining pesticide can stain
what you touch.
Fueling
Pay attention to the fire. Please keep
the fuel tank far away from the flame
or sparks. Don’t smoke near fuel. When
the machinery is running, ban adding
fuel to the fuel tank.
Open the fuel cap carefully to allow any
pressure build-up in the tank to release
slowly and avoid fuel spillage.
Fuel your power tool only in well-
ventilated areas. If you spill fuel, wipe
the machine immediately - if fuel gets
on your clothing - change immediately.
Check for leakage. To
reduce the risk of serious
of fatal burn injuries, do
not start or run the
engine until leak is fixed.
After
fueling, tighten
down the screw-type fuel
cap
as securely as
possible.
Your power tool produces
toxic exhaust fumes as soon as
the engine is running. These
fumes may be colorless and
odorless and contain
unburned hydrocarbons and
benzol. Never operate the
power tool in enclosed or
poorly ventilated locations.