13
3.
Final Rinse
Start final rinse at bottom an work upward. Make sure you thoroughly rinse the surface
and that all detergent has been removed.
4.
Shut down
1. Be sure all detergent is flushed from system.
2. Turn off motor.
3. Turn off water supply.
4. After motor and water supply are turned off, trigger gun to depressurize system.
CAUTION: NEVER turn water supply off before turning motor off. Serious damage could
occur to the pump and/ or motor.
WARNING! NEVER disconnect high pressure discharge hose from machine while system is
pressurized. To depressurize, turn motor off, turn water supply off and squeeze gun trigger
2-3 time.
5. After each use, wipe all surfaces of the pressure washer with a clean, damp cloth.
5.
Storage
Do not store pressure washer outdoors. Do not store pressure washer where it might
freeze.
TIPS FOR EXTENDING THE LIFE OF
YOUR PRESSURE WASHER
1.
Never operate unit without water.
2.
Pressure washer is not meant to pump hot water. Never connect to hot water supply
–
this will significantly reduce life of the pump.
3.
Using detergent other than others brand may cause damage to pump components (o-
rings, etc.). This also applies to chemicals such as bleach, dish soap, etc.
4.
Never operate unit for more than one (1) minute without spraying water. Resulting heat
buildup will damage pump.
5.
Before adjusting nozzle’
s pressure (high-to-low or low-to-high) release trigger. Failure
to do so will reduce life of o-rings in lance.
