9
Nozzle cleaning instructions
A clogged or partially clogged nozzle can cause a significant reduction of water coming
out of the nozzle and cause the unit to pulsate while spraying. To clean out the nozzle:
•
Turn off and unplug unit.
•
Turn off water supply. Relieve any pressure trapped in the hose by squeezing trigger 2-
3 times.
•
Separate lance from gun.
•
Rotate nozzle to the narrow stream setting. This opens up the fan blades.
•
Using included tip cleaner, or an unfolded paper clip, insert wire into the nozzle hole
and move back and forth until debris is dislodged (See Figure 5).
•
Remove additional debris by back-flushing water through the nozzle. To do this, place
end of a garden hose (with water running ) to end of nozzle for 30-60 seconds.
Water inlet screen
The water inlet filter must be inspected regularly, so as to avoid blockage and restriction in
the water supply to the pump.
Figure 5
–
Insert wire into the nozzle hole and move back
and forth until debris is dislodged
Nozzle
Tip cleaner
