Step #8 --ASSEMBLE
FRONT & REAR COVER
Secure the Front and Back
Cover to the arch panel by using
the ropes provided.
Main Cover Edge Tie Off
-
Once both Front and Rear
Covers are installed, the Roof
Cover Edge flap, front and rear,
should be tightened and tied off.
Begin by pulling the remaining
Roof Cover over the Frame arch,
so the rope pocket is over the
edge of the frame. Tie off the
rope that goes through the rope
pocket on one side. The rope ties
off to the loop that is located on
the Base Flange in Corner (part
#6). Moving to the other side,
begin to pull the rope down.
Hold the rope in hand, and
push down at the bottom of
the rope with a foot. Pull the
rope tight, and tie off to the
welded hoop on the Base
Flange. As you are pulling
the edge rope, it will be
necessary to adjust the
excess material that will
collect along the rope
packet. Adjust the material
so that it is not bunched up
and it does not pull the roof
cover to one side or the
other. Once the Front is
completed, repeat the
process on the Rear flap of
the Roof Cover.
