Figure 4 The arch installation
Assemble each arch on ground. Each arches
consist of:
One Top roof tube (Part #1)
Two Roof curving tube (Part # 2/2A/2B)
Two Sidewall tube (Part # 3/3A/3B/3C)
Connect the arches by Using the hexagon
bolts with washers and nuts through predrilled
holes in frame members. Do not tighten down
the nuts completely until frame is fully
assembled and set in place.
Step #2 --ARCH ASSEMBLY
THE FRONT AND BACK PANEL
FRAME ASSEMBLY
Assemble the front and back panel frame.
According to Figure 5&6, connect the end
wall frame by Using the bolts with washers
and nuts through predrilled holes in frame
members. Do not tighten down the nuts
completely until frame is fully assembled and
set in place.
Figure 6 Frame Installation
for Back Panel
NOTE: Please notice that the part code of the
arch sections. The sections of different arches
are not the same. Check with the Part List and
the Sketch Figure #1.
NOTE: The Arches, the Front and Back panel
should be assembled well on the ground, before
erected into the Base Flanges.
1
2/2A/2B
3/3A/3B/3C
Figure 5 Frame Installation
for Front Panel
10
11
12
12A
13
13A
3C
2A
1
3A
1
2B
3B
16
17
14
15
