Male
Male
coupler
coupler
Installer supplied
flexible gas line
with 1/2” female
adapter or GHS12
Installer supplied
shut-off valve must
be easily accessible
Regulator
Assembly
3/8”
3/8”
male
male
flare
flare
dapter
dapter
1/2”
NPT
from
Manifold
male flare
adapter
(installer
supplied)
Natural Fixed Piping Connection
Check with your local gas utility company or with
local codes for instructions on installing gas
supply lines. Be sure to check on type and size of
run and how deep to bury the lines. If the gas line
is too small, the grill will not function properly.
To connect the supplied regulator assembly to
the incoming flexible gas line, attach with a
female adaptor to the male flare adapter on the
regulator assembly to the gas line. Ensure that
the regulator arrow points in the direction of the
gas flow towards the unit and away from the
supply.
Attach the regulator assembly to the grill unit.
Do not forget to place the installer
supplied gas valve in an accessible
location.
Note:
If using a Viking GSH12 flexible hose,
remove the 1/2” flare adapter and attach
hose to the male flare on the regulator
assembly.
19
Connection
Operating Pressure
Supply Pressure
Standard Residential 1/2" ID gas
service line - 1/2" NPT male with
flare adapter.
4.0" W.C.P. Nat.
6" to 10" W.C.P. Nat. If in excess
of 10" W.C.P., a step-down
regulator is required.
18
3/8”
3/8”
male
male
flare
flare
dapter
dapter
Installer supplied
flexible gas line
with 3/8” female
adapter
Installer supplied
shut-off valve must
be easily accessible
Regulator
Assembly
3/8” male
flare
adapter
Male
Male
coupler
coupler
3/8”
3/8”
male
male
flare
flare
dapter
dapter
1/2”
NPT
from
Manifold
LP/Propane Fixed Piping Connection
Check with your local gas utility company or with
local codes for instructions on installing gas
supply lines. Be sure to check on type and size of
run and how deep to bury the lines. If the gas line
is too small, the grill will not function properly.
To connect the supplied regulator assembly to
the incoming flexible gas line, attach with a 3/8”
female flare adapter to the 3/8” male flare
adapter to the regulator assembly. Gas
connectors must comply with ANS Z21.75/ CSA
6.27. The maximum connection length shall be
6ft. The connection must be visible through a
door or opening in the enclosure. directions for
supporting piping, flex tubing, and connections
within the built in enclosure. Directions for
protecting tubing and connectors if they pass
through openings within compartments in the
built in enclosure. Ensure that the regulator arrow
points in the direction of the gas flow towards the
unit and away from the supply. Attach the
regulator assembly to the grill unit.
Do not
forget to place the installer supplied gas
valve in an accessible location
Connection
Operating Pressure
Supply Pressure
Standard Residential 1/2" ID gas
service line - 1/2” NPT male with
3/8" flare adapter.
10.0" W.C.P. LP/Propane
11" to 14" W.C.P. LP. If in excess
of 14" W.C.P., a step-down
regulator is required.
