Viking VCSB48, Service Notebook

Page: 10 / 33

10
DISPLAY PANEL KEYBOARD
Display Panel Operation
Keyboard Pad Functions
Entry Tone
Indicates a pad was pressed, command read and
accepted. Turn off entry tone by pressing and
holding Display On pad for 3 to 5 seconds.
Command Accepted Tone
Three short tones indicate command accepted.
Display On Pad
1. Activates control panel. Control panel
remains active at least 10 minutes.
2. Turns off Power Up Alarm (flashing lights)
after power is first plugged in or after power
outage.
Note: All pads, except Alarm Off, are inactive
until Display On is pressed.
Freezer Temp Pad
Activates freezer temperature setting mode.
1. Freezer indicator light will glow. Freezer
temperature setting will be displayed.
Factory setting is 5.
2. Change freezer temperature setting by
pressing Higher Temp or Lower Temp Pad.
Ref Temp Pad
Activates refrigerator temperature setting mode.
1. Refrigerator indicator light will glow.
Refrigerator temperature setting will be
displayed. Factory setting is 5.
2. Change refrigerator temperature setting by
pressing Higher Temp or Lower Temp Pad.
Higher Temp Pad
Raises temperature setting one bar at a time. If
entry tone is on. Tone will sound at each bar
level until top level is reached.
1. Turn on temperature setting function of
control panel by pressing Higher Temp Pad.
2. Press and hold Higher Temp pad to raise
temperature setting at a faster rate.