background image

Control Panels

1. Press “Activate Controls” pad.

2. Verify unit is not in Sabbath Mode.

If in Sabbath Mode:

A. The Sabbath Mode will disable the interior lights, display (except SAB indicator, temperature

and compartment indicator) and alarm. 

To exit the Sabbath Mode:

B. Press and hold “Activate Controls” and then “Display Off” for 3 seconds. (The control will beep

three times to alert the user the Sabbath Mode has been exited.)

3. Verify unit is not in Showroom Mode.

If in Showroom Mode:

A. The Showroom Mode will disable the refrigerator system but all other functions are normal.

These include lights and control. (If the refrigerator is in Showroom Mode, SHOW will be lit.)

To exit Showroom Mode:

B. Press  and hold “Activate Controls”; while holding, press and hold “Higher” and “Alarm Off”

together. (The control will beep three times to alert the user that Showroom Mode has been
exited.)

4. Press “Activate Controls” then press and hold “Lower”; while holding, press and hold “Display Off”

and hold until beeps (force start compressor).

5. All models need to be set at 38° F and 0° F for the Refrigerator and Freezer respectfully - factory 

setting.

37

36

Verify Operations

If service is required, call your dealer or authorized service agency. The name of the authorized
service agency can be obtained from the dealer or distributor in your area.

Have the following information readily available.
• Model number
• Serial number
• Date purchased
• Name of dealer from whom purchased

Clearly describe the problem that you are having. If you are unable to obtain the name of an
authorized service agency, or if you continue to have service problems, contact Viking Range
Corporation at 1-888-(845-4641), or write to:

VIKING RANGE, LLC

PREFERRED SERVICE

111 Front Street

Greenwood, Mississippi 38930 USA

Record the following information indicated below. You will need it if service is ever required.

The serial number and model number for your appliance are located on the identification plate
mounted behind the top light.

Model No. _________________________________________________________________________________________________________

Serial No. _________________________________________________________________________________________________________

Date of Purchase _________________________________________________________________________________________________

Date Installed _____________________________________________________________________________________________________

Dealer’s Name ____________________________________________________________________________________________________

Address ______________________________________________________________________________

If service requires installation of parts, use only authorized parts to insure protection under
the warranty.

Keep this manual for future reference.

Service & Registration

ACTIVATE

CONTROLS

FRZ

TEMP

REF

TEMP

HIGHER

LOWER

FAST

COOL

MAX
REF

MAX
FRZ

ALARM

OFF

DISPLAY

OFF

FREEZER
MAX FRZ MAX REF

F

FAST COOL
SAB   SHOW

REFRIGERATOR

DOOR OPEN

POWER

HIGH TEMP

C

Bottom-Mount

ACTIVATE

CONTROLS

FRZ

TEMP

REF

TEMP

HIGHER

LOWER

FAST

COOL

MAX
REF

MAX
FRZ

ALARM

OFF

DISPLAY

OFF

FREEZER
MAX FRZ MAX REF

F

FAST COOL
SAB   SHOW

REFRIGERATOR

DOOR OPEN

POWER

HIGH TEMP

C

Side-by-Side

Summary of Contents for Quiet Cool VCSB5421





















Reviews: