Specifications
• Quick and easy installation
• SIP compliant, see page 2 for more information
• PoE powered (class 3, <13 Watts)
• Paging prioritization
• Plays audio from standard multicast sources
• SIP endpoint or multicast group member
• Red LED indicates call status
• Compatible with Polycom multicast paging
• Built-in high-efficiency 6 Watt class D amplifier
• Can drive up to six 8 Ohm analog speakers for more coverage
• SIP/Multicast: SIP page, SIP page and zoned multicast receive
• Support for access code to prevent unwanted SIP calls
• Hangs up on: call end signal, time-out, or touch tone command
• Network remote speaker volume control
• Mounting: Magnetically secure to speaker magnet or fasten to
the 25/70V transformer mounting holes on speaker frame
• Chassis protects circuitry against plenum dust
• Diagnostics for testing speaker
• Programmable pre-page alert tone
Power:
PoE class 3 (<13 Watts)
Dimensions:
3.63” x 2.65” x 0.90” (92.2 mm x 67.3 mm x 22.9 mm)
Shipping Weight:
0.60 lbs (0.27 kg)
Operating Temperature:
-40° F to 140° F (-40° C to 60° C)
Humidity:
5% to 95% non-condensing
SIP Audio Codecs:
G711u, G722 and G711a
Multicast Audio Codecs:
G711u and G722
Network Compliance:
IEEE 802.3 af PoE, SIP 2.0 RFC3261,
100BASE-TX with auto cross-over
Regulatory Compliance:
CE, FCC Part 15 and Canada ICES-003
Class A
Maximum Output Level:
105 dB SPL @ 1M (driving one 8 Ohm
speaker with sensitivity of 96dB / 1W / 1M S.P. Level)
Amplifier:
6 Watt class D
Connections:
(1) RJ45 10/100 Base-T, (4) Butt Connectors
The
PSA-IP
Speaker Adapter enables you to quickly convert any
8 Ohm, 25V or 70V analog paging speaker into a SIP endpoint
paging speaker. After the quick conversion, the speaker can
then be used for standard one-way SIP endpoint paging or
multicast paging.
The compact chassis of the
PSA-IP
can be mounted
magnetically to the back of an analog speaker magnet, or use
the included screws to attach the unit to the 25/70V transformer
mounting holes on the speaker frame. Installation is easy -
attach the wires, and then connect a CAT5/6 cable from your
PoE switch.
The
PSA-IP
features a high-efficiency 6 Watt class D amplifier
capable of driving up to six 8 Ohm analog paging speakers. This
allows a single
PSA-IP
to cover up to six speaker paging zones
with approximately 1 Watt of paging power per speaker.
• Amplified SIP endpoint or multicast IP paging for: Schools,
Hospitals, Retail Stores, Office Spaces, etc.
• Provide background music and sound masking via Multicast
• Background music for: Elevator applications, Retail Stores,
Office Spaces, etc.
Convert Any 8 Ohm, 25V or 70V Analog Paging Speaker to an
IP Speaker for SIP Endpoint Paging and / or Multicast Paging
Applications
Installation requires a Network Administrator / IT Technician
!
PRODUCT
MANUAL
Designed, Manufactured and Supported in the USA
PSA-IP
IP Paging
Speaker Adapter
April 14, 2021
SECURITY & COMMUNICATION
VIKING
Features
Information: 715-386-8861
www.VikingElectronics.com
Typical installation example shown above
speaker not included
