manualshive.com logo in svg

Viking FREEDOM VK490, Technical Data Manual, Page: 2 / 34

Share
Download
Viking FREEDOM VK490 Technical Data Manual Download Page 2

FREEDOM

®

 RESIDENTIAL 

CONCEALED HORIZONTAL 

SIDEWALL SPRINKLER VK490 

(K5.9)

TECHNICAL DATA

The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058

Telephone: 269-945-9501  Technical Services: 877-384-5464  Fax: 269-818-1680  Email: [email protected]

Visit the Viking website for the latest edition of this technical data page.

Form No. F_032116       Rev 01        September 7, 2022

Page 2 of 7

Cover Plate Assembly: 

Base Part No. 16207 (3-5/16” diameter)  

Specify finish and temperature rating of the cover plate assembly by adding 

the appropriate suffixes for the finish and the cover temperature rating to 

the base part number:

Finish Suffixes: White Polyester = M-/W, Chrome = F

Temperature Suffix: 139 °F (59 °C) = A, 165 °F (74 °C) = C

For example, cover 16207 with a White Painted finish and a 139 °F (59 °C) 

temperature rating = 16207MA/W. 

Available Finishes And Temperature Ratings:

 Refer to Table 1.

Accessories:

 (Also refer to the Viking website.)

Sprinkler Wrenches**:

A. Heavy Duty Wrench Part No. 16208W/R** (available since 2010)

B. Head Cabinet Wrench Part Number 16267

***

 (available since 2010) 

C. Optional Cover Plate Installer Tool Part No. 14867 (available since 2007)

 **Requires a ½” ratchet (not available from Viking).

***Ideal for sprinkler cabinets.  

Sprinkler Cabinet: 

Part No. 01731A  (available since 1971)

4.  INSTALLATION

Refer to appropriate NFPA Installation Standards.

5.  OPERATION

During fire conditions, when the temperature around the sprinkler approaches 

its operating temperature, the cover plate detaches. Continued heating of the 

exposed sprinkler causes the fusible element to disengage, releasing the sealing assembly. Water flowing  through the sprinkler 

orifice strikes the flow shaper, forming a uniform spray pattern over a specific area of coverage determined by the water supply 

pressure at the sprinkler to extinguish or control the fire.

6.  INSPECTIONS, TESTS AND MAINTENANCE

Refer to NFPA 25 for Inspection, Testing and Maintenance requirements.

7.  AVAILABILITY

Viking Freedom

®

 Residential Concealed Horizontal Sidewall Sprinkler VK490 is available through a network of domestic and 

international distributors. See The Viking Corporation web site for the closest distributor or contact The Viking Corporation.

8.  GUARANTEE

For details of warranty, refer to Viking’s current list price schedule or contact Viking directly.

TABLE 1: AVAILABLE SPRINKLER TEMPERATURE RATINGS AND FINISHES

Sprinkler Temperature 

Classification

Sprinkler Nominal

 

Temperature Rating

1

Maximum Ambient

 

Ceiling Temperature

2

Temperature Rating of the 

Cover Assembly (Required)

Cover Plate

 

Base Part Number

3

Ordinary

165 °F (74 °C)

100 °F (38 °C)

139 °F (59 °C)

16207

Intermediate

205 °F (96 °C)

150 °F (65 °C)

165 °F (74 °C)

16207

Sprinkler Finishes: 

Brass

Cover Plate Finish:

 White Polyester, Chrome

Footnotes

1. 

The sprinkler temperature rating is stamped on the inlet. 

2. 

Based on NFPA-13, NFPA 13R, and NFPA 13D. Other limits may apply, depending on fire loading, sprinkler location, and other requirements of the 

Authority Having Jurisdiction. Refer to specific installation standards.

3. 

Part number shown is the base part number. For complete part number, refer to current Viking price list schedule.

Figure 1:  Identification of Custom Paint for 

Concealed Covers

All custom color painted cover plates will have an 

identifying label affixed to the inside of the cover 

that indicates the custom color and will have a 

representative sample (a paint dot) of the paint 

on the label.

FA

C

TO

R

Y

 A

PP

LIE

D CUSTOM

 PA

IN

T C

O

LO

R

Summary of Contents for FREEDOM VK490



































Reviews:

No comments