Viking EVDOF Double Installation Manual Download Page 21

21

Performance Checklist

A qualified installer should carry out the
following checks:

Check oven bake function–bake element on
full power, center and outside broil elements
at partial power. Convection bake function–
bake and broil elements the same with the
convection fan on.

Check TruConvec™ function– TruConvec
element (behind convection fan cover) on
and convection fan on.

Check high broil function–both broil elements
at full power. Convection broil function is the
same with convection fan on.

Check medium broil function–inner and outer
broil elements pulse on and off.

Check low broil function–inner broil element
only. 

Check self-clean function–Door will lock in
approximately 30 seconds, the center and
outside broil elements will turn on and the
bake element will turn on at partial power.
Check broil elements through window to
make sure they are on, then abort self-clean
cycle to unlock door.

Any adjustments necessary that are a result of
the installer not following instructions will be
the responsibility of the installer, dealer or the
end user of the product.

Final Preparation

• Some stainless steel parts may have a

plastic protective wrap, which must be
peeled off. All stainless steel body parts
should be wiped with hot soapy water and
with liquid cleaner designed for this
material.  If build-up occurs, do not use
steel wool, abrasive cloths, cleaners or
powders!! If it is necessary to scrape
stainless steel to remove encrusted
materials, soak with hot, wet cloths to
loosen the material, then use a wood or
nylon scraper. Do not use a metal knife,
spatula, or any other metal tool to scrape
stainless steel!! Scratches are almost
impossible to remove.

• The interior of the oven should be washed

thoroughly with hot, soapy water to remove
film residues and installation debris before
being used for food preparation, then rinsed
and wiped dry. Solutions stronger than soapy
water are rarely needed.

NOTICE

When conducting performance test, 

DO NOT

run self-clean cycle for more

than 10 minutes with oven racks inside
oven. This could cause them to discolor
due to the high temperature required 
for self-cleaning.

Summary of Contents for EVDOF Double

























Reviews: