Viking EVDOF Double Installation Manual Download Page 15

General Information

• All openings in the wall behind the

appliance or in the floor under the
appliance should be sealed.

• Keep appliance area clear and free from

combustible materials, gasoline and other
flammable vapors.

• Disconnect the electrical supply prior to

servicing or cleaning.

• When removing the appliance for cleaning

or service, disconnect AC power supply
and carefully remove the appliance by
pulling forward.

• 

CAUTION

: The oven is heavy – use care

when handling!

• Electrical requirements are listed in the

product specifications under the electrical
requirements section.

Recommendations for

Unpacking

• Products are shipped on pallets with foam

footings and corrugated inner-packing and
exterior hoods.

• Products are anchored to the pallet using

metal straps that are screwed to the
bottom of the product and the pallet.

• DO NOT remove protective packaging

until you are ready to perform the
installation.

• To remove the packaging, first remove the

staples located at the bottom perimeter of
the corrugated cover.

• Remove the corrugated cover by lifting it

off the product and remove the inner-
packing.

• Detach the product from the metal anchor

strip by removing the attachment screw.

• DO NOT remove the protective wrapping

from the product control panel until the
product is installed.

Recommendations for
Moving

• The appliance is heavy – use extreme care

when handling!

• 

WARNING: DO NOT

use the handle or

oven door to lift the oven. Remove door
before installation to ensure that it is not
used to lift the unit. 

Do not lift or carry

the door by the handle.

• Only proper equipment should be used to

move products.

• ALWAYS take steps to protect flooring at

the installation location when moving
products.

CAUTION

Avoid any damage to oven vents. The vents
need to be unobstructed and open to provide
proper airflow for optimal oven performance.

CAUTION

The cooling fan should be operating when
the unit is in operation. If you notice the
cooling fan is not operating or you observe
unusual or excessive noise coming from the
cooling fan, contact a Viking Authorized
Service Center before continuing operation.
Failure to do so can result in damage to the
oven or surrounding cabinets.

15

Summary of Contents for EVDOF Double

























Reviews: