6
A. Adjusting Speaker Volume
Programming
B. Adjusting the Microphone Volume
F. Wiring the Proximity Card Reader
In certain noisy locations (background traffic, machinery or wind), the microphone volume may need
to be decreased. A symptom of this is one-way talk path, in which the distant party cannot be heard
over the speaker. A microphone volume pot is provided for increasing or decreasing the microphone
volume.
Note:
If the microphone volume is set too high or too low, one-way talk path may occur.
The speaker volume pot can be adjusted to increase or decrease the speaker volume to the level
desired.
VIKING
Model:
XXXXXXX
xxxxxx
S/N:
REN 0.8A:
XXXXXXXX
V
iking Electronics, Inc. (715) 386-8861
1531 Industrial St., Hudson, WI 54016
P/N:
DEV
:
Complies with FCC Part 15 and 68 Reg. No: US:AH3TE08A22264
Rear View of the
E-70 Circuit Board
Mounting Plate
Speaker
Volume
(see section A)
Microphone
Volume
(see section B)
1 2 3 4
ON
DIP
Switches
ON
OFF
VIKING
Model:
XXXXXXX
xxxxxx
S/N:
REN 0.8A:
XXXXXXXX
V
iking Electronics, Inc. (715) 386-8861
1531 Industrial St., Hudson, WI 54016
P/N:
DEV
:
Complies with FCC Part 15 and 68 Reg. No: US:AH3TE08A22264
Back View of the E-70 Circuit
Board Mounting Plate
- Black (GND)
+ Red (5-14VDC)
Green (Date 0)
White (Data 1)
* Up to 500 ft
3-Wire Gel-Filled Butt
Connectors included
(3M Scotchlok UR2)
24 Awg Stranded
Shielded Cable
(Belden 9537)
Black
Red
Green
White
STAND-ALONE
DOOR CONTROLLER
ENTRY SYSTEM
VIKING
PROGRAM
PHONE
GANG
PROG
COMM
ELECTRONICS
HUDSON, WI 54016
VIKING
©
MODEL ES-1
POW
ER 12
VD
C
BLK
RED
GRN
WHT
ENTRY POINT
WIEGAND
DEVICE
12V DC
Adapter
Included
Local Touch Tone
Programming Phone
(Power typically
not required for
gate controllers.)
Doorstrike/Magnetic Lock
(not included)
Doorstrike
Power Supply
5A@30VDC/250VAC
maximum
(not included)
or
RAD-1A Remote Access
Device (not included)
Remote Touch Tone
Programming Phone
or
LOG
BUS
Black
Red
Green
White
To Viking model
ES-1 or
Equivalent 26-Bit
Wiegand Card
Reader Controller
Viking Model ES-1 (not included,
see DOD# 193 for more information)
* Note:
Up to 500 ft Wiegand cable run length can be achieved using Belden 9537 or equivalent 24 AWG stranded shielded
cable. Longer cable runs up to 10,000 ft can be achieved by using a Wiegand card reader extender. For more information, go
to: www.cypressworld.com
